Step 1 - Remove the kickstand
Step 2 - Install the top and rear inserts, bottom cover and front bottom bumper
Step 3 - Connect parts 1, 2, 3 and install them on the EUC using 2 screws from
the installation pack
Step 4 - Install the kickstand cover and mount it back in the EUC
Step 5 - Start the velcro installation by partially peeling off the protective paper like in the picture below. Center the velcro around the middle screw and then align it with the top edges. Peel off the rest of the paper and align it with the bottom part. Repeat on the back side.
Step 6 - Install the handle covers. Secure them in place using provided zipties
