Rear handle covers can be assembled in 3 different configurations:
- Option 1: Without any additional accesories
- Option 2: With grip
- Option 3: With seat adaptor (can’t be used simultainously with grip)
Option 1: Handle cover assembly – no additional accesories
Step 1: Remove the black screw holding the profile. Slide the cover on the handle (it might require some force to be pushed in place).
Step 2: Secure the top part using one of the provided screws, and the bottom part with a ziptie.
Option 2: Handle covers with grip
Step 1: Remove the plastic part of rear handle on one side
Step 2: Slide the grip on the profile – notches on the grip should point to the back. Reassemble the part of handle, except the black screw holding the profile.
Step 3: Slide the cover on the handle, notch on the grip should align with the tab on the handle cover. Secure the top part using one of the provided screws and the bottom using one of the zipties. Repeat on the other side.
Option 3: Handle covers with seat adaptor
Step1: Insert the 8mm pins into the slots of handle covers
Step 2: Remove the black screw holding the profile. Slide the cover on the handle (it might require some force to be pushed in place). Secure the top part using one of the provided screws and the bottom using ziptie.
Step 3: Mount the cover on the other side and slide the seat adaptor on the 8mm pins. Secure the cover using screw and ziptie.
