Built for Tight Corners and Technical Trails
Gripsters Narrow are the racing and off-road version of Gripsters. The platform is 112 mm wide instead of 130 mm, and the difference comes off the outer edge: the part of a pedal that scrapes the asphalt at full lean and clips rocks on a trail. Length barely changes (299 mm instead of 305 mm), so your foot gets the same support. Made for the Veteran Lynx, Lynx S, Sherman L, Sherman P, Patton S and Oryx.
Narrow by Design
- Racing and fast road riding: more lean angle in tight turns and fast corners before the pedal touches the asphalt, so you can hold a tighter line. Add the tilt adapter for even more.
- Off-road: 18 mm more room on each side between the pedal and rocks, roots and ruts, and less chance of catching an edge in rock gardens and on tight singletrack.
- Parallel stance: with your feet parallel and close to the wheel, you barely use the outer part of a wide pedal anyway.
Wide or toes-out stance? Choose the standard Gripsters.
High-Density Grip
Gripsters Narrow carry more pins: 36 per pedal (72 per set), 13 more than standard Gripsters. That is almost twice the pin density, with contact points under the whole sole for hard leans, braking and landings. Every pin is height-adjustable with an Allen key: run them high for mud and off-road, lower for easier foot repositioning.
Modular Angle Adjustment
The tilt adapter is the same bolt-on part as on standard Gripsters, so adapters you already own fit these pedals too. You can also start with the fixed setup and add the adapter later.
Customizable Overlays
The rubber overlays are cut for the 112 mm platform and come in the same three profiles as standard Gripsters: flat, or one of two concave shapes that hold heel and toes in place under hard acceleration and braking. Pick from 15+ colors. Standard Gripsters overlays do not fit Narrow.
Integrated Bumpers
The overlays wrap the outer edge and double as bumpers. They take the knocks when you trolley the wheel through a doorway, clip a curb or catch a leg in a fall, and help reduce damage to your surroundings and your body. When a pedal does touch down mid-corner, it is rubber that meets the asphalt, not bare aluminum.
Machined Strength & Engineering
CNC machined from billet 6061 aluminum, with the structure optimized through FEA for even stress distribution under heavy loads, drops and torque from hard riding.
Specifications
- Length: 29.9 cm / 11.8 in
- Width: 11.2 cm / 4.4 in
- Weight:
- Pins: 36 per pedal, 72 per set, height-adjustable
- Material: 6061 aluminum (pedal), TPU (overlays)
Reviews
There are no reviews yet