Step I – Preparation
- Remove two screws from top panel as shown below.
- Turn OFF your lift to stop switch in kingsong app
- Open lift switch handle
Step II – Seat mount installation
- Put the seat mount on top of the EUC. Attach rear clamp to the opened lift handle.
- Align front part of seat mount so it can fit into cutouts
- Insert two included m4x16 screws as shown below. Don’t use too much force when tightening screws.
Step III – Attach seat to the mount
- Press the sliders into slots
- Squeeze front part of seat and push it down into slots. If seat didn’t snap in snugly, push front part from inside to the outer sides of seat (like on pictures below).