Step 1: Disassemble the whole front handle of your EUC. Keep all of the original screws, as you will use them to mount your accesories.
Step 2: Prepare left and right mount for the front bumper (there are marks on the inside). Mount them in the same place as the stock handle, using original screws.
Step 3: To assemble the front bumper, first slide it into the mount on one side. Make sure that the parts allign properly.
Step 4: Pull the other side of the bumper and push it into the mounting piece. Make sure that the parts are correctly aligned
Step 5: Slide the rubber grip (optional) on the handle profile. If you haven’t purchased the grip, go to the next step.
Step 6: Slide the sides of the front bumper slightly off the mounting pieces, don’t pull it of completely! Make enough space, so you can slide the handle between the front bumper sides. The notch in the grip should align with the groove on the bumper.
Step 7: Secure the front grip using stock, black screws. Apply velcro pieces on the sides.
