Veteran Sherman L - Bottom Protection (no kickstand) - Manual
Step 1: Insert the Bottom Cover (SL_BB_C). Insert the wings first into marked slots:
Step 2: Push the other side up to fit it on the top of the protruding part of the battery pack:
Step 3: Remove the bottom front plastic cover. Keep the bolt for later use:
Step 4: Remove the bottom bolt from the Jump Pad mount. Keep it for later use:
Step 5: Fit the SL_BB_B1 (B2 for the left side) part into te slot in the corner and align it with Bottom Cover. Secure it with the stock bolt that was there before:
Step 6: If you keep the the Jump Pad mount – secure the B1 part with another stock bolt:
Step 7: Once the kicksand was removed, place the SL_BB_B2 (B1 for the left side) in the bottom rear corner. Secure it with one stock bolt:
Step 8: Add SL_BB_A2 (A1 for the left side) bumper part and secure them with 2 stock M5 bolts:
Step 9: Secure the top part from the side with provided bolt and washer:
Step 10 (For removed Jump Pad mount): Place the SL_BB_A1 (A2 for the left side) on the top of the mounted bumper. Secure it with 2 stock bolts:
Step 7 (For removed Jump Pad mount): Secure it from the side with provided bolt and washer:
Repeat all steps on the other side.