Inmotion P6 – Front Bumper & Handle

INMOTION P6 – FRONT BUMPER & HANDLE 

The most exposed zone of the P6 — front battery edge, screen, and motherboard housing — finally gets real protection. Shaped from impact-absorbing elastopolymer that absorbs crash energy without cracking under load, the front bumper flows into the side body as one continuous line: no broken silhouette, no visual gap where the stock face ends.

Available as a standalone module or as part of the complete P6 Bumper Kit.

Ergonomic Front Handle

The handle has been repositioned and reshaped for a secure grip during emergency braking, seated riding, and lifting or carrying the wheel. It sits embedded in the bumper body in a way that keeps it clear of your knees during aggressive carving and stance changes — no more knee interference from the stock handle area.

Extra Top-Corner Protection

Additional material was added at the front top corner of the battery box — the zone most exposed in forward tip-overs — giving the screen and motherboard a real buffer against impact.

Optimized Airflow

Air inlets are positioned on the front face at the height of the headlight and cooling fans, channeling airflow inward onto the radiator. The P6 stays cool, the bumper doesn’t fight the stock thermal design.

Headlight & Logo Compatibility

• Sized to provide a protective buffer around the GrizzLights Horizon self-stabilizing headlight (sold separately)

Stock vs Grizzla Front Bumper (side view)

With the stock bumper, the Horizon extends past the bumper’s leading edge – it’s the first thing to touch the ground when the wheel goes down nose-first. With the Grizzla Front Bumper, the bumper reaches ahead of the light and takes the impact instead.

Stock vs Grizzla Front Bumper (top view)

From above you can see the same story: in the stock setup the light body sits proud of the bumper outline, while in the Grizzla setup it stays fully within the bumper’s protective footprint.

• Supports all three Inmotion logo/bracket scenarios: keep stock, remove, or install aftermarket

Front Kickstand Function

The front bumper doubles as a reliable front kickstand — useful when parking the wheel somewhere the stock rear kickstand isn’t enough.

Key Features:

• Impact-Absorbing Elastopolymer: Absorbs energy, won’t crack under load
• Ergonomic Handle Placement: Embedded for secure grip, positioned clear of knees
• Front + Top-Corner Armor: Protects battery edge, screen, and motherboard
• Continuous Body Line: Flows into the side body for a clean, intentional look
• Air Inlets: Directed airflow to radiator at headlight/fan height
• Horizon-Ready: Protective buffer sized for GrizzLights Horizon
• Kickstand Function: Doubles as a front kickstand
• 15+ Colors: Including matte finishes and military camo tones

COLOR CUSTOMIZATION

• Bumper Body — 15+ colors, including industry-unique matte finishes and military camo tones (army green, dark brown, sand white)
• Accents — 15+ colors: Front Handle and Front Air Inlets configured separately for a two-tone look

WHAT’S INCLUDED

• Front Bumper & Handle
• Installation hardware set

IMPORTANT NOTES

Pairs with GrizzLights Horizon

This front bumper is sized to provide a protective buffer around the GrizzLights Horizon for P6 — our self-stabilizing headlight that keeps the beam level regardless of wheel tilt. If you’re upgrading the front of your P6, the two are made for each other.

Complete the Protection

This module covers the front zone only. For full coverage — rear bumper and handle, bottom armor, integrated kickstand, and full-size mudguard — check the P6 Bumper Kit,.