There are 2 available ways to mount the seat on your EUC:
- Option 1: With rear handle covers and seat adaptor included in the set (see manual)
- Option 2: Using seat adaptor included with the seat
Step 1: Slide the seat on the adaptor of your choice.
Step 2: On the bottom of the seat there is a piece of soft velcro, detach it from the seat, peel off the white paper and put it back on the seat, directly over the “hooks” part of velcro. Clean the top part of your EUC (underneath the seat) with rubbing alcohol, so there is no dust or any debris.
Step 3: Close the seat and press it from the top, then open the seat. Piece of the velcro should now be glued to the top of EUC. Please make sure that the surface underneath the seat is clean before you stick the velcro on it.
